Steel Control Arm Bushings
Lower Bushings
Due to production tolerances in stock auto parts, steel
bushings need to be
tack welded into the control arms.
20069
1.40" Diameter / 2.94" Length Replaces SCP #CLB5
1.65" Diameter / 2.39" Length Replaces SCP #CLB2 |
20075
1.40" Diameter / 2.39" Length Replaces SCP #CLB4
1.9" Diameter / 2.39" Length Replaces SCP # CLB3 |
20076
20077CHEVELLE - MONTE - INTERMEDIATE
| Part # | Description | Racer |
| 20069 | '78 - '81 (Front) | $ 14.95 |
| 20069-1 | '78 & Up (Front) Metric (Long Lower) | $ 15.95 |
| 20075 | '64 - '66 (Front) 2nd Design | $ 14.95 |
| '64 - '74 (Front) | ||
| 20076 | '64 - '66 (Front) 1st Design | $ 14.95 |
| '75 - '77 (Front) Drill Sleeve | ||
| '82 - '83 (Front) Drill Sleeve | ||
| '64 - '72 (Rear) | ||
| '78 - '83 (Rear) Drill Mounts | ||
| '75 - Up (Rear Metric (Long Lower) | ||
| 20077 | '73 - '77 (Rear) Drill Sleeve | $14.95 |
CAMARO - FIREBIRD
|
Part # |
Application |
Racer |
| 20075 | '64 - '74 (Front) | $ 14.95 |
| 20076 | '75 - Up (Front) Drill Sleeve | $ 14.95 |
| '67 - '72 (Rear) | ||
| 20077 | '73 - '81 (Rear) Drill Sleeve | $ 14.95 |
Upper Bushing
Due to production tolerances in stock auto parts, steel
bushings need to be
tack welded into the control arms.
 20078
1.27" Diameter / 1.50" Length Replaces SCP #CAB7
1.39" Diameter / 1.88" Length |
 20079
1.53" Diameter / 1.84" Length Replaces SCP #CAB5
1.31" Diameter / 1.79" Length |
20098
20099CHEVELLE - MONTE - INTERMEDIATE
|
Part # |
Description | Racer |
| 20078 | '67 - '72 (All) | $ 10.95 |
| 20079 | '78 - Up (All) | $ 10.95 |
| 20098 | '73 - '77 (Front) | $ 10.95 |
| 20099 | '73 - '77 (Rear) | $ 10.95 |
CAMARO - FIREBIRD
| Part # |
Description |
Racer |
| 20078 | '67 - '69 (All) | $ 10.95 |
| 20098 | '74 - '79 (Front) | $ 10.95 |
| 20099 | '74 - '79 (Rear) | $ 10.95 |
Control Arm Bushing for Strut Car
Fits most strut cars that use rubber bushing lower arms
Sleeve
Bushing
Part #
20070
Part # 20071
Racer $ 7.95
Racer $ 7.95
For more information, or to place an order, call 1-800-722-2845.
