Swing Arm Birdcages

Fits most popular swing arm suspensions - Fits all 3" tubes - Plated for longer life
9 3/8" Center to center mount locations

Steel Birdcage     

*  Fits "Sardeson" I.M.C.A. Modifieds.  Shock mount is welded to birdcage.

A-1 Racing Birdcages

Unlike all others, it is not necessary for these birdcages to be taken apart and cleaned after each race.  The don't require 
grease and will not bind or attract dirt, (which is the primary cause of rear end bind).

Swing Arm Style                                      Four Bar Style

Retainer Rings

Use on 3" axle tubes - Aluminum or Steel

Steel Birdcage Kits

With Caliper Mount

Allows you to place 4-link bracket where you need it.  Nylon insert for bind free movement.  Dirt seals to reduce 
maintenance.  Comes with all hardware for easy installation, including brake floaters.

Steel Birdcage Kits

Without Caliper Mount

90° Steel Birdcage Shock Mount

Mounts to steel birdcages.  Allows movement of shock eye, without breaking eye off.

Part # BSB-7550-4         Racer $ 59.95

Lower 4 Bar Mount

Used to shorten the trailing arm on a 2-link or 4-link car.

Part # 20149           Racer $54.95

Coil Over Clamp Bracket

Bracket fasteners on rear axle and mounts coil over so that
axle wrap action tends to load or unload the tires closest to clamps.

Retainer Ring

Part # BSB-7017      Racer $ 12.95

For more information, or to place an order, call 1-800-722-2845.