Rear Control Arm Mounts
Locates strut tubes to the rear end housing.
Used to mount shock and slider assemblies.
Fits on 3" Axle Tube
Weld
On
Clamp On
| Part # |
Description |
Part # |
| 20157 | Clamp-On Mount - Centered | $ 64.95 |
| 20158 | Weld-On Mount - Centered | $ 44.95 |
Clamp Collar
Mounts Parts on 3" Tube - 1 3/4" Wide
Part # 20140C Racer $ 19.95
Mounting Brackets
Used to mount radius rods, brake rods, third links, panhard
bars,
or any other suspension component that uses 3/4" rod ends.
| Part # |
Description |
Rod End |
Racer |
| 20380 | 5 Hole - 1/8" Thick | 5/8" | $ 7.95 |
| 20381 | 5 Hole - 1/8" Thick | 3/4" | $ 7.95 |
| 20383 | 6 Hole - 1/8" Thick | 5/8" | $ 8.95 |
| 20382 | 6 Hole - 1/8" Thick | 3/4" | $ 8.95 |
Coil Over Clamp Bracket
Bracket fasteners on rear axle and mounts coil over so that
axle wrap action tends to load or unload the tires closest to clamps.
| Part # |
Description |
Racer |
| 20140 | 5" From Center to Base* | $ 39.95 |
| 20141 | 7" From Center to Base* | $ 39.95 |
Steel Rear
Radius Rod Brackets
Coil-Over Shock Type Conventional Coil & Tie Rod End Shock
|
Description |
Part # LH |
Part # RH |
Racer |
| Coil-Over Shock Type Mount (shown) | 20152L | 20152R | $ 27.95 |
| Conventional Coil & Tie Rod End Shock | 20154L | 20154R | $ 33.95 |
For more information, or to place an order, call 1-800-722-2845
