Winters 9" Ford Rear Housing & Assemblies

WINTERS's floater GN style rear end is built for oval track racing.  The housing is 
assembled, welded and straightened so they are ready to install.  Built entirely of new, quality 
material for strength and reliability.  Includes standard 8 bolt rotors.

  • Right side tube extended into center to reduce oil flow into tube

  • Center Housing is sleeved before tubes are inserted

  • Housing stays straight

  • Tubes are replaceable

Description 60" Centered 60" x 2" Offset 62" Centered 62" x 2" Offset Racer
  GN 5 x 5" Bare Housing   60401   60402   60404   60405 $ 349.95
  GN 5 x 5" Assembly - Coarse   60421   60422   60424   60425 $ 779.95
  GN 5 x 5" Assembly - Coarse - Drilled Axles     60421D   60422D   60424D   60425D $ 899.95
  GN 5 x 4 3/4" Assembly - Coarse   60481   60482   60484   60485 $ 779.95

*  Assemblies include:  Housing, axles, rotors, bearing kits, drive flange, hubs and hardware. 

Recommended Axle Lengths for 9" Ford

Description LH RH
  GN - 60" Centered 28 1/4" 32 1/2"
  GN - 60" x 2" Offset 26 1/2" 34 1/2"
  GN - 62" Centered 29 1/2" 33 1/2"
  GN - 62" x 2" Offset 27 1/2" 35 1/2"

For 9" Ford Assembly Parts please see This Page.

Winters GN Rear Hub Kits

These 9" Ford GN hubs are designed using a rotor mounting flange, which eliminates 
the need for a separate brake hat.  Kit comes complete with races, wheel studs, 
lug nuts, bearings and seals.

Part #

Description

 Racer
  30737   GN 5 x 5" Hub Kit $209.95
  30737-1   GN 5 x 4 3/4" Hub Kit $209.95
  30738   GN Steel Hub $139.95
  30739   Drive Plate $ 72.95
  30742   Drive Plate Cap $ 11.95
  60396-1   O-Rings $   3.95
  10383   Rear Hub Seal $   7.95
  10384   Rear Axle Seal $   6.95
  10344   Rear Hub Bearing $  25.95

9" Ford Gaskets

High Quality fiber gasket

Part # 60316-1  (Each)    Racer $   3.95  
 Part # 60316 (5 Pack)   Racer $ 15.95

Steel Core - Reusable

Part # FEL-2302 (Each)    Racer $12.95

 

For more information, or to place an order call 1-800-722-2845.