RAM "Assault" Racing Clutch
Open design button style - High torque - Lightweight - 3 Disc Chevy
Part # R9351S Racer $569.95
Replacement Parts
|
Description |
Part # | Racer |
| Floater Plate | R9901 | $ 49.95 |
| Pressure Plate Ring * * | R9902 | $ 134.95 |
| Diaphragm Cover * * | R9903 | $ 134.95 |
| Disc - 1 1/8" x 10 Spline * (90 Series - Bounded) |
R9951 |
$ 89.95 |
| Disc - 1 1/8" x 10 Spline * (70 Series - Riveted) | R6951 | $ 94.95 |
| Throw Out Bearing | R495 | $ 39.95 |
* NOTE: 70 Series discs are riveted, 90 Series discs
are bonded.
** NOTE: When replacing either the cover or pressure ring on 70 Series
clutch, both pieces must be replaced.
Ram "Street Stock" Clutch
This RAM Clutch is designed for "stock clutch rule"
classes. The heavy duty pressure spring
provides increased static pressure
over stock clutches. This 10 1/2" lightweight assembly has a billet
aluminum pressure ring with a thin steel heat shield that provides a durable
matting surface for the clutch disc.
Used in conjunction with a six point Rametallic disc, this unit weighs just 13.5 lbs.
| Part # |
Description |
Racer |
| R802 | Single Disc - 10 1/2" Assembly | $ 459.95 |
| R801 | Pressure Plate | $ 319.95 |
| R1021 | 1 Disc - 10 1/2" x 1 1/8" Spline | $ 159.95 |
HOWE
"Stock Type" Throwout Bearing
This HOWE "stock type"
hydraulic throwout bearing is for classes where stock type clutches
are required. Simply install by replacing one bolt from the front of the
transmission
and sliding the bearing over the bearing retainer.
Includes: Shim kit, hydraulic fittings, hardware and instructions.
Designed for stock type clutch - No adaptor required
| Part # |
Description |
Racer |
| H82870 | Hydraulic Throwout Bearing - Stock Clutch | $ 149.95 |
| H82871 | Rebuild Kit - Stock Clutch | $ 7.95 |
| H82872 | Replacement Bearing - Stock Clutch | $ 39.95 |
HOWE
Throwout Bearing
The HOWE hydraulic throwout bearing
is the lightest available. Fits 2 or 3 disc, QuarterMaster
or Tilton clutches. Installs easily by replacing two bearing retainer
bolts with an
adjuster stud then sliding the bearing into the retainer shaft.
Fits 2 or 3 Disc clutch -
WILL NOT WORK ON STOCK TYPE CLUTCH
Complete with bolt kit
| Part # |
Description |
Racer |
| H8288 | Hydraulic Throwout Bearing | $ 119.95 |
| H82881 | Rebuild Kit | $ 7.95 |
| H82882 | Replacement Bearing | $ 39.95 |
For more information, or to place an order please call 1-800-722-2845.
