BERT / BRINN Spline - Use with flex plate
| Part # |
Description |
Racer |
| 64105 | Steel Chevy Coupler | $ 47.95 |
| 64106 | Steel Chevy Coupler - '86 & Up | $ 47.95 |
| 64105A | Aluminum Chevy Coupler | $ 49.95 |
| 64105F | Steel Ford Coupler | $ 49.95 |
Lightweight flywheel is designed for "stock clutch
rule" classes. This 10.5", 153 tooth
unit weighs only 16.4
lbs and is zero balanced.
Part # R1510 Racer $ 159.95
The flex plate shield provides protection when you are running
automatic transmissions.
Fits Chevy only. - SFI Certified - Steel
Part # 64030 Racer $ 39.95
Fits S/B Chevy - 153 or 168 Tooth - Steel
| Part # |
Description |
Racer |
| 52301 | 153 Tooth - 2 Piece Rear Main - Internal | $ 24.95 |
| 52303 | 153 Tooth - 1 Piece Rear Main (CRATE) | $ 39.95 |
| 52304 | 168 Tooth - 2 Piece Rear Main - Internal | $ 24.95 |
Includes 6 bolts
Part # 10131 Racer $9.95
This long design compensates for motor
mounts or
engine mid-plate thickness.
Fits Chevy
Part #64027 Racer $12.95
Used to Balance 400 Chevy Engine with a 350 Flywheel
Part # 80070 Racer $14.95
Crank drive flange bolts to the back of the crank when
using
a powerglide transmission
| Part # |
Description |
Racer |
| 64113 | Power Glide Drive Assembly | $179.95 |
| 64114 | Drive Flange | $ 79.95 |
| 64115 | Drive Flange Sleeve | $ 99.95 |
| 10131 | Bolt Kit - 6 Bolts | $ 9.95 |
Pull Style (Mounts to Chassis)
*Note: Push rod (part # 40332) must be used with the push style slave cylinder
|
Description |
Part # | Racer |
| Pull Style Slave Cylinder | 40283 | $ 54.95 |
| Push Style Slave Cylinder | 40330 | $ 59.95 |
| Push Rod - Push Style Slave | 40332 | $ 14.95 |
| Pull Style Rebuild Kit | 40284NP | $ 25.95 |
| Mount Rod | 40288NP | $ 9.95 |
| Mount Washer & Nut | 40287 | $ 4.95 |
Used to store or transport transmission.
Fits
transmission with short tail housing.
Part # 65108 Racer $ 24.95
For more information, or to place an order, call 1-800-722-2845
